Parasound JC1 +Silver

After five years of development, the JC 1+ monoblock amplifier from Parasound and designer John Curl has finally arrived. "Integrity Endures™" embodies Parasound's unwavering commitment to delivering high-quality, durable products without compromising on value. This guiding principle has been the key to their success, as seen when experiencing the full immersion of music. In 2016, Parasound celebrated their 35th anniversary by reaffirming their dedication to integrity and excellence with the motto "Integrity Endures," a testament to their enduring impact on the audio industry.

Key Features:

• Circuitry designed by legendary John CurlUltra-high bias Class A/AB operation
• 25 watts of pure Class A power
• Stable with speaker impedance dips below 1Ω
• Bybee Music Rails™ - active high frequency filters for input stage
• New John Curl driver stage employs a cascode circuit for greater open loop bandwidth & superior linearity
• Gain switch to select 29 dB or 23 dB gain for optimum compatibility with high gain preamps or extremely efficient speakers
• Direct-coupled signal path, no capacitors or inductors in the audio path

Specifications:

Changes from the JC 1 to JC 1+

Read the JC 1+ development story here

General:

Power Output
450 x1 watts @ 8 Ω
850 x1 watts @ 4 Ω
1300 x1 watts @ 2 Ω

Power measurements are with 120 VAC:
0.15% THD, RMS continuous power,
full audio band (20 Hz - 20 kHz)

Class A Power Output
25 Watts, bias switch set to high
10 Watts, bias switch set to low

Current Capacity
180 amps, peak

Slew Rate > 130 volts per microsecond

Frequency Response
2 Hz - 120 kHz, +0/-2 dB
20 Hz - 20 kHz, +0/-0.25 dB

Total Harmonic Distortion (THD)
< 0.15 % at full power
< 0.02 % at typical listening levels

IM Distortion
< 0.03 %

TIM
Unmeasurable

Damping Factor
> 1200 at 20 Hz

Input Impedance
Unbalanced: 50 kΩ
Balanced: 100 kΩ, (50 kΩ per leg)

S/N Ratio, inputs shorted
>122 dB, IHF A-weighted, bias set to Low
>120 dB, IHF A-weighted, bias set to High
>113 dB, Unweighted, bias set to Low
>111 dB, Unweighted, bias set to High

Total Gain
29 dB (Gain switch set to normal)
23 dB (Gain switch set to low)

Input Sensitivity for 28.28 V Output into 8 Ω
Unbalanced: 1 V
Balanced: 1 V per leg
(Gain switch set to normal)

DC Trigger Requirements
+9 Vdc to +12 Vdc, 5 mA

Audio Trigger Requirement
2.5 mV - 10 mV

XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

Dimensions
Height without feet: 7-1/8" (181 mm)
Height with feet: 7-3/4" (197 mm)
Depth: 20" (508 mm)
Depth with cables: 21-1/2" (546 mm)

Shipping Carton Dimensions
Width: 29-1/2" (750 mm)
Depth: 27-1/2" (700 mm)
Height: 15-3/4" (400 mm)

Net Weight
83 lb. (37.6 kg)

Shipping Weight
107 lb. (48.5 kg)

Power Requirement
Standby: <1 Watt
Idle (bias set to low): 145 Watts
Idle (bias set to high): 275 Watts
Typical Listening levels: 400 Watts
Maximum: 1500 Watts