We love answering questions. Talk to an expert now.
on all e-commerce orders over $100
Always Included
While similar in construction to the Stogi, this tonearm incorporates a conical tube and the vertical bearings have highly damped brass housing. A conical tube is machined from a solid aluminum rod which has a built-in precise azimuth adjustment worm drive mechanism.
Tonearm geometry, bearing, wires, and other parts are the same as Stogi and effective mass differs only slightly.
General description:
This is a very rigid medium mass tonearm with precision ball bearings which, while withstanding very heavy loads, displays extremely low starting and running friction and noise levels. The main frame and all other parts are machined from solid aluminum and brass blocks. Some parts are anodized and some are not, to help control tonearm resonance. The headshell provides a stable cartridge mounting, while the internally damped tube connects this to the massive bearing parts where any vibration or noise is dispersed. Most parts are glued together for rigidity and damping.
The conical tube machined from solid aluminum rod is internally damped and divided into two parts which, while further aiding damping, also allows for precise azimuth adjustment. A special mechanism (worm drive), using an Allen key, allows the tube to be rotated back and forth in minimal increments with no air gap. This mechanism is submerged in silicone grease for further damping. A marker line clearly shows the azimuth position and facilitates use, while allowing for repeated adjustments.
A decoupled brass counterweight controls balance and adjusts tracking force while damping vibration in the tube. The massive arm base serves to clamp the tonearm rigidly to the armboard. All bearings are pre-loaded and glued into position which, while damping vibrations in them, also provides long-lasting, zero play, low friction, and low noise level in the bearings. VTA adjustment is made by raising or lowering the tonearm in the arm base itself.
Wires are in one length from cartridge pins to RCA connectors. High-quality wires are incorporated into our cable. It is also possible to use the tonearm in a balanced ( XLR) or 5pin configuration.
Specifications
Effective length- 229 mm
Arm mount distance- 212 mm
Distance from spindle to horizontal bearing- 212 mm
Bearing type- Precise ball bearing
Effective mass- 13 gr
Total mass- 870 g
Offset angle- 23*
VTA adjustment- Yes
Azimuth adjustment- Precise worm drive
Tube- Conical
Bias- Yes
Max. Standard cartridge weight- 15 gr
Optional light and heavy counterweight- Yes
Damping- No
Detachable headshell- No
Arm mount- Kuzma & Stogi
Standard wiring- Copper, RCA Bullets (58pF)
Accessories- protractor, Allen keys, cartridge mounting screws
Options- XLR, 5pin